Starting Up; Dc-Connection - Kontron Embedded Computers V Box Express User Manual

Starting Up

The DC power socket is located on the front side of the system.
The voltage of the power source must correspond to the
voltage value on the type label.

DC-Connection

The length of the DC connecting wires may not exceed 3m. Strip
and twist the connecting wire-ends but do not tin it the with solder.
Fig.8: DC-connector (without Phoenix plug
terminal)
For the DC-connection prepare the connecting wires with the supplied Phoenix
plug. Pay attention to the right polarity of the wires (refer to Fig. 9 and 9a ).
The second end of each wire will be prepared as required for the connection to
the DC-power supply.
V Box Express – User's Manual
Fig. 8a: DC-Terminal (Phoenix plug terminal
AWG 28-16 )
Starting Up
21