Maintenance And Prevention; Replacing The Lithium Battery - Kontron Embedded Computers V Box Express User Manual

Maintenance and Prevention

Maintenance and Prevention
Kontron Embedded Computers systems require minimal maintenance and care to
keep them operating correctly.
Occasionally wipe the system with a soft dry cloth.
You should only remove persistent dirt by use of a soft, slightly damp cloth
(use only a mild detergent).

Replacing the Lithium Battery

The baseboard is equipped with a lithium battery. To replace this battery, please
proceed as follows:
1. Remove the battery cover plate on the small side of the system
2. Remove the battery by pressing outwards the ejector spring.
3. Insert the new battery into the socket.
4. Make sure that you insert the battery correctly. The plus pole must be on top!
5. Reinstall the battery cover plate.
The lithium battery must be replaced with an identical battery or a battery type
recommended by Kontron Embedded Computers (Lithium battery 3.0 V for RTC,
type: CR2032).
1
2
3
24
1 Screw for battery cover plate
2 Battery
3 Cover plate
V Box Express – User' Manual