Table of Contents
Advertisement
Product Description
Power Button
1
Fig. 5: Power button and LED indicators
The power button "PWR ON" is located on the bottom side of the system.
Press this button in order to turn the system on or off. The power button behavior
can be set in the BIOS Setup.
LED Control Indicators
The V Box Express is equipped with two LED indicators.
Power LED
Lights up green when the system is powered on via the power
button.
Lights up red when the system is in standby (depends on the
behavior of the power button (BIOS Setup setting).
HDD LED
Lights up red for hard disk activity.
16
Even the system is turned off via the ATX power button
there is still a standby-voltage of 5 V on the ETX express
baseboard.
The system is not completely disconnected from the main
power source by turning it off via the ATX power button.
The unit is only completely disconnected from the main
power source, when the power cord is disconnected either
from the power source or the unit.
Therefore, the power cord and its connectors must always
remain easily accessible.
1
Power button
2
2
HDD LED
3
3
Power LED
V Box Express – User' Manual
Advertisement
Table of Contents
