Replacing The System Board - Fujitsu PRIMERGY RX330 S1 Service Supplement Manual

Replacing the system board

Ê Reinstall the air duct.
Ê Close the server and connect all power plugs (for a detailed description see
the Options Guide).
4.10 Replacing the system board
V
CAUTION!
There are two versions of the system board D2440 with the part numbers
S26361-D2440-A10x (RX330 S1) and S26361-D2440-A11x (Econel
230R S1).
Ê Open the server as described in the
Ê Remove all external cables.
Ê Remove the riser card holder with the installed controllers (for a description
see the Options Guide).
Ê Remove the processor (for a description see the
processor" on page
Ê Remove the memory modules (for a description see the Options Guide).
Ê Remove all cables which may be connected to the system board.
42
section "Preparation" on page
38).
Service Supplement
Replacement routines
section "Replacing the
17.
RX330 S1