Fujitsu PRIMERGY RX330 S1 Service Supplement Manual page 21

Replacement routines
Figure 6: Disconnecting the front panel cable
Ê Disconnect the front panel cable from the front panel module.
Ê Connect the front panel cable to the new front panel module.
Ê Push the front panel module into the housing. Take notice of the front panel
cable.
Ê Fasten the front panel board with the screw.
Ê Route the front panel cable in the cable clamps again.
Ê Close the server and connect all power plugs (for a detailed description see
the Options Guide).
RX330 S1
Replacing the front panel module
Service Supplement 21