Introduction; Get Started - mangOH Red Manual

1: Introduction

Now that you have your mangOH™ Red, it's time to start using it!
Important:
Use this guide only if you are using a native Linux computer (dev(elopment) machine)—Ubuntu is
recommended. This guide includes instructions for native Linux® dev machines using CLI (Command Line Inter-
preter).
Use this guide to:
• Assemble your mangOH Red
• Set up your dev machine for mangOH development
• Install and run applications, and send data to the IoT Cloud via AirVantage, Sierra Wireless' cloud-based
service platform for over-the-air (OTA) device management.
To get started with a Windows dev machine, or for other mangOH Red resources (guides, tutorials, etc.), visit
mangoh.io/mangoh-red-resources.

1.1 Get Started!

Important:
Follow all steps as described. If you skip, change, or 'jump around' steps, your device or devel-
opment environment may not work properly.
Before you begin, make sure your dev machine meets the minimum suggested requirements in
page 7 for mangOH Red application development.
Note:
The instructions in this guide have been tested on Ubuntu 16.04. If you use a different distribution
(e.g. Debian, Fedora, etc.), you may need to adjust commands, set permissions, etc. If you need assistance,
please check out the forum at forum.mangoh.io.
Rev 3 9/21/17 6
1
Table 1-1 on