Removing/Inserting A Cf3 Module; Removing A Cf3 Module - mangOH Red Manual

F: Removing/Inserting a CF3 Module
F
F.1 Removing a CF3 module
To remove a CF3 module from the mangOH Red:
1. Remove the module cover using the module cover removal tool—Starting at one corner, insert the tool in the
pair of holes and carefully pry the cover away from the module.
2. Repeat at the other locations (pairs of pry holes are on each side).
3. Lift the cover off the module.
4. Carefully lift the module straight up out of the socket.
Rev 3 9/21/17 56