mangOH Red Manual page 25

9. Make sure the mangOH board is powered on and is connected to your dev machine—the board is connected
if you receive ping responses:
$ ping 192.168.2.2
Press Ctrl+C to return to the command prompt.
10. Install the mangOH_Red platform on your mangOH board:
$ instsys mangOH_Red.wp85.update 192.168.2.2
If the applications install successfully, the last message shown will be "SUCCESS
Note:
If the target has any problems starting the mangOH Red platformat applications, it automatically reboots and
restores to its original state (prior to the instsys command). If this happens, the target will not be reachable whlie it is
rebooting.
11. Verify the mangOH platform apps installed correctly:
a. Connect to the mangOH Red:
$ ssh root@192.168.2.2
b. Show the list of installed apps to confirm the build and install succeeded:
# app status
If the following apps appear in the list, the build and install succeeded:
c. Disconnect from the mangOH Red:
# exit
Rev 3 9/21/17
5.1: Build and Install Legato Platform and mangOH Red Platform on Target
25
If gpioExpanderServiceRed, mqttClient,
and redSensorToCloud are listed, the
install succeeded.
Done".