Quickstart Guide - Crowcon Gasman User Manual

Gasman

Quickstart guide

1. Getting started
Review your Gasman unit
Gas
Sensor
Operator
Button
Switching on your unit
Gasman requires little setting up, follow these simple steps to get your
unit ready for use.
1. Ensure the unit is in clean air.
2. Switch on
Press and hold the operator button for
approximately 3 seconds until the red LEDs
flash.
The operator display screen will light up and
the unit will begin a warm up sequence.
Gas
name
label
Quickstart guide
Alarm
LEDs
Sounder
outlet
Operator LCD
Display Screen
H S
2