Sony LT10 Series Manual page 32

Note
• When there is a preset value the "reset" command will set
the value to zero. To recall the preset value input the
"recall preset value" command.
• The data set by the commands given in the table will not
be stored by the display unit.
If the power is turned off the settings must be repeated.
• Provide intervals of at least 50 ms between command
inputs.
2. Example of data transmission
• External device → display unit
To preset 12.345 for A channel
C R L F
AP=12.345
• Display unit → external device
1 When a 1 channel model has received the "R"
command, or a 2 channel model has received the "Ar"
command :
During normal operation
(Output the A channel value of 12.345)
When an alarm is triggered : AE
72
C R L F
: AM12.345
C R L F
2 When a 2 channel model has received the "R"
command :
During normal operation :
(a) A–12.345MBM67.890
C R L F
(b) A–12.345 BM67.890
(Output the A channel value of –12.345 and the
B channel value of 67.890)
When an alarm is triggered :
(a) AEMBE C R L F
C R L F C R L F
(b) AE BE
(a) or (b) can be chosen with the initial settings.
(See P54 "5-1-3. RS-232C model".)
Note
M means a space.
C R L F
C R L F