Download
Share
Print this page
Haag-Streit LENSTAR LS 900 Installation Manual
  1. Manuals
  2. Brands
  3. Haag-Streit Manuals
  4. Medical Equipment
  5. LENSTAR LS 900
  6. Installation manual

Haag-Streit LENSTAR LS 900 Installation Manual

Hide thumbs Also See for LENSTAR LS 900:

Advertisement

Quick Links

INSTALLATION GUIDE
LENSTAR LS 900
AND
LENSTAR LS 900 APS
Edition 3.10 / 2016-02
INSTALLATION GUIDE

Advertisement

loading
Need help?

Need help?

Do you have a question about the LENSTAR LS 900 and is the answer not in the manual?

Questions and answers

Related Manuals for Haag-Streit LENSTAR LS 900

Summary of Contents for Haag-Streit LENSTAR LS 900

  • Page 1 INSTALLATION GUIDE LENSTAR LS 900 LENSTAR LS 900 APS Edition 3.10 / 2016-02 INSTALLATION GUIDE...
  • Page 2 Edition 3.10 / 2016-02 NOTES! This manual is only intended for installation on LENSTAR LS 900 and LENSTAR LS 900 APS units. This manual is only to be used by trained engineers that have attended an official HAAG- STREIT training course.

  • Page 3: Table Of Contents

    Sample configuration according to EN 60601-1 ......................5 Mounting the roller rails/slide plate and cable connection ..................... 6 Instrument table (option) assembly ..........................13 List of modifications ..............................14 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02...

  • Page 4: Safety Instructions

    LENSTAR LS 900 and LENSTAR LS 900 APS appliance and helping to ensure that it functions safely and remains in perfect working order.

  • Page 5: Sample Configuration According To En 60601-1

    Power Supply LENSTAR (1020392) / LENSTAR APS (1022106) Laptop / PC Instrument Table Power Supply Laptop / PC Insulation transformer Printer med. approved EN 60601-1 USB 2.0 or higher © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02...

  • Page 6: Mounting The Roller Rails/Slide Plate And Cable Connection

    The side identification sticker features a mounting aid to align it properly with the table edge if used in combination with a HS head rest Part Number: 7200123 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02...
  • Page 7 Insert both cables in the appropriate box and fix with the tension compensator (4).  Mount the cable cover.  Mount the rail covers (1021914). Figure 1 Figure 2 Figure 3 Figure 4 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02...
  • Page 8 Insert both cables in the appropriate box and fix with the tension compensator.  Mount cable cover.  Mount the rail covers (1021914). Figure 5 Figure 6 Figure 7 Figure 8 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02...
  • Page 9 The side identification sticker features a mounting aid to align it properly with the table edge if used in combination with a HS head rest Part Number: 7200123. © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02...
  • Page 10 LENSTAR can move free. If the LENSTAR can’t move correct in all directions, adjust the free cable length until the LENSTAR can move evenly.  Mount the rail covers. Figure 9 Figure 10 Figure 11 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02...
  • Page 11 Snap off the cable channel cover piece and smoothen the edge with a sharp knife (13).  Pull the two cables through the black tube (14) (1003686). Figure 12 Figure 13 Figure 14 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02...
  • Page 12 Pull the black tube through the cable guide (17).  Check that the motion of the LENSTAR is not hindered by the cabling (18). Figure 15 Figure 16 Figure 17 Figure 18 © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02...

  • Page 13: Instrument Table (Option) Assembly

    The instrument table is delivered in a separate package. To assemble the table, please consult the instructions for use enclosed with it. The LENSTAR LS 900 APS Sets with table HSM-901 Workstation, includes two spacers (1022335) (19). The Workstation table top is 4mm thicker than the Standard table top. To compensate this differences this spacers are mounted.

  • Page 14: List Of Modifications

    Add quantity information on components of the table fitting set (1022328) in chapter 2.3.4. 2.00 08.05.2015 Move and change of chapter 2.4. 1.00 01.05.2015 First release. © HAAG-STREIT AG, 3098 Koeniz, Switzerland – HS-Doc. No. 7220553 - Edition 3.10 / 2016-02...
  • Page 16 For further questions please contact the HAAG-STREIT Customer Support at: service@haag-streit.com...

This manual is also suitable for:

Lenstar ls 900 aps