Setpoint Screen; Detailed Screen With Values; Basic Usage; Using The Home Screen - Daikin Altherma User Reference Manual

4 Operation
Item
Restriction: Only displayed if a room
Room
thermostat is connected to the indoor unit.
Set the room temperature.
Shows the applicable symbol for your main
Main zone
zone emitter type.
Set the leaving water temperature for the
main zone.
Restriction: Only displayed if there are two
Additional zone
leaving water temperature zones. Shows
the applicable symbol for your additional
zone emitter type.
Set the leaving water temperature for the
additional zone (if present).
Shows the applicable symbol for your unit.
Space heating/
cooling
Put the unit in heating mode or cooling
mode. You cannot change the mode on
heating only models.
Restriction: Only displayed if a domestic
Tank
hot water tank is present.
Set the domestic hot water tank
temperature.
Gives access to user settings such as
User settings
holiday mode and quiet mode.
Displays data and information about the
Information
indoor unit.
Restriction: Only for the installer.
Installer settings
Gives access to advanced settings.
Restriction: Only for the installer.
Commissioning
Perform tests and maintenance.
Change the active user profile.
User profile
Turn heating/cooling functionality and
Operation
domestic hot water preparation on or off.
4.2.3

Setpoint screen

The setpoint screen is displayed for screens describing system
components that need a setpoint value.
Example:
▪ Room temperature screen
▪ Main zone screen
▪ Additional zone screen
▪ Tank temperature screen
d
+
c
a2
b2
e
d
d
–
e
a1 b1
Possible actions on this screen
Go through the list of the submenu.
Go to the submenu.
Adjust and automatically apply the desired
temperature.
Item
Minimum temperature limit
User reference guide
6
Description
Description
a1 Fixed by the unit
a2 Restricted by the installer
Item
Maximum temperature limit
Current temperature
Desired temperature
Submenu
4.2.4

Detailed screen with values

a b
a Settings
b Values
Possible actions on this screen
Go through the list of settings.
Change the value.
Go to the next setting.
Confirm changes and proceed.
4.3

Basic usage

4.3.1

Using the home screen

About the home screen
On the home screen, you can read out the most important settings
that are meant for daily usage. The setup of the unit is displayed in a
schematic way. See "4.2.1 Home screen" on page 5
information.
To go to the home screen
Press the button to return to the home screen.
4.3.2

Using the menu structure

About the menu structure
Go to the menu structure to change the settings of the unit and read
out values such as the current temperature. For an overview of the
settings available to the user, see
user settings" on page 15.
To go to the menu structure
Press to go to the menu structure.
4.3.3

Turning operation ON or OFF

Certain functionalities of the unit can be enabled of disabled
separately. If a functionality is disabled, the corresponding
temperature icon in the home screen will be greyed out.
To turn room temperature control ON or OFF
1 Go to [C.1]: Operation > Room.
2 Set operation to On or Off.
To turn space heating/cooling operation ON or OFF
1 Go to [C.2]: Operation > Space heating/cooling.
2 Set operation to On or Off.
To turn tank heating operation ON or OFF
EABH/X16DA+9W + EAVH/X16S18+23DA6V+9W
Description
b1 Fixed by the unit
b2 Restricted by the installer
c Measured by the unit
d Turn the right dial to
increase/decrease.
e Turn or press the left dial to
go to the submenu.
for more
"4.9 Menu structure: Overview
Daikin Altherma – Low temperature split
4P556071-1 – 2018.10