Brother MFC-J650DW Faq & Troubleshooting page 4

9/30/2019
3. Open the Jam Clear Cover (1) at the back of the machine.
4. Clean the Paper Pick-up Rollers (1) with a soft lint-free cloth moistened with water. Slowly turn the rollers so that the whole surface is cleaned.
After cleaning, wipe the rollers with a dry, soft lint-free cloth to remove all moisture.
5. Close the Jam Clear Cover. Make sure the cover is closed completely.
6. Put the paper tray firmly back in the machine.
7. Re-connect the power cord.
Cause 5:
The Jam Clear Cover is not closed properly.
Check the Jam Clear Cover is closed evenly at both ends.
Cause 6:
The paper tray was not fully inserted.
1. Remove the Paper tray (1) completely out of the machine.
https://support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=mfcj650dw_us_eu_as&faqid=faq00002490_023
No Paper Fed | Brother
4/6