Brother MFC-J650DW Faq & Troubleshooting page 3

9/30/2019
4. Put the paper tray firmly back in the machine.
5. Re-connect the power cord.
Do not use the machine again until the rollers are dry. Using the machine before the rollers are dry may cause paper feed problems.
Cause 4:
Paper dust has accumulated on the surface of the paper pick-up rollers.
Follow the steps below to clean the paper pick-up rollers:
1. Unplug your Brother machine from the AC power outlet (electrical socket).
2. Pull the paper tray completely out of the machine.
If the machine starts to multi-feed the last few sheets of paper in the tray, clean the Base Pad (1) with a soft lint-free cloth moistened
with water.
After cleaning, wipe the pad with a dry, soft lint-free cloth to remove all moisture.
https://support.brother.com/g/b/faqend.aspx?c=us&lang=en&prod=mfcj650dw_us_eu_as&faqid=faq00002490_023
No Paper Fed | Brother
3/6