Configuring The Hardware And Networks; How To Configure The Hardware - Siemens SIMATIC PCS 7 Getting Started

Configuring the hardware and networks

3.1

How to Configure the Hardware

Introduction
The PCS Wizard has created a SIMATIC 400 station, a SIMATIC PC station and master
data library. Now add other hardware modules from the hardware catalog to the project.
You perform these configuration steps in HW Config.
Requirement
● The PCS 7 multiproject "fast_MP" has been created.
Procedure
Step
1
2
First Steps (V7.1)
Getting Started, 03/2009, A5E02122181-01
Action
Select the SIMATIC 400 station in the component view, and then select the Edit > Open
object command.
HW Config opens.
Open the shortcut menu of the CP 443-1 in slot 5, and then select the Delete
•
command.
The "Delete" dialog box opens.
Click "Yes".
•
The CP 443-1 is deleted.
3
11