Siemens SIMATIC PCS 7 Getting Started page 42

Programming and interconnecting the process tags
7.1 How to program and interconnect the process tags
Step
7
8
Result
The result shown in the following figure is displayed after step 7.
42
Action
Close the "Insert signals" dialog box.
Click the "Parameters" tab in the Process Object view in the right window.
•
Split the right window into two sections as described in step 3. The "Chart" column is
•
displayed in the left window and the columns "Process tag I/O", "Category" and "Value"
are displayed in the right window.
Click column header "Chart" to sort the column in descending order.
•
Enter the value 6 in the "Value" column in the right window for the "VALVE1" chart
•
name and "Monitoring time" process tag/IO interface.
Enter the value 6 in the "Value" column in the right window for the "VALVE2" chart
•
name and "Monitoring time" process tag/IO interface.
First Steps (V7.1)
Getting Started, 03/2009, A5E02122181-01