Configuring the hardware and networks
3.6 Downloading the target system
3.6
Downloading the target system
3.6.1
How to download the Ethernet interface from NetPro to the PLC
Introduction
The following section describes how to download the Ethernet interface configured in HW
Config from NetPro to the PLC.
Requirements
● Configuration has been completed in HW Config.
● NetPro is open.
● S7-PLCSIM has been started and the CPU is in the "STOP" state
Procedure
Step
1
2
3
4
26
Action
In the network view in NetPro, click on the AS "SIMATIC 400(1)" symbol on the "CPU 414-3
PN/DP" interface.
Open the context menu and select menu command Download to current project > Selec‐
ted Stations.
Click the "Yes" button in the warning dialog box that appears.
Select the menu command Network > Exit.
NetPro closes.
Getting Started (V8.1 with APL)
Getting Started, 07/2014, A5E32713210-AA