Advertisement
Quick Links
SELECTRONIC
Hard-Wired AC Powered
Innsbrook Lavatory
Proximity Faucet
Certified to comply with ASME A112.18.1
© 2014 American Standard
M965652 (11/14)
NOTE TO INSTALLER: Please give this manual to the customer after installation.
NOTE TO INSTALLER: Please give this manual to the customer after installation.
To learn more about American Standard Selectronic
or e-mail us at: CRTTEAM@americanstandard.com
For Parts, Service, Warranty or other Assistance,
please call (844) CRT-TEAM / (844) 278-8326
®
CAUTION: Use only American Standard
CAUTION: Use only American Standard
supplied cable sets. Using non-AS supplied
supplied cable sets. Using non-AS supplied
cables, or cutting, splicing or modifying any
cables, or cutting, splicing or modifying any
components will void the warranty.
components will void the warranty.
Product No.'s & Options
Specifications
Faucet Installation
Electrical Installation
Start-up / Maintenance
FAQ's / Troubleshooting
Parts
Products visit our website at: www.americanstandard-us.com
®
(In Canada: 1-800-387-0369)
(In Toronto Area only: 1-905-306-1093)
MODEL NUMBERS
605X.202 605X.204 605X.205
1
2
2-3
4-6
7-9
9-10
11
Advertisement
Related Manuals for American Standard SELECTRONIC 605X.202
Summary of Contents for American Standard SELECTRONIC 605X.202
- Page 1 M965652 (11/14) NOTE TO INSTALLER: Please give this manual to the customer after installation. NOTE TO INSTALLER: Please give this manual to the customer after installation. To learn more about American Standard Selectronic Products visit our website at: www.americanstandard-us.com ®...
- Page 2 UNPACKING All American Standard Faucets Are Water Tested At Our Factory. Some Residual Water May Remain In The Faucet During Shipping. The illustration below shows the fitting and all loose items after they have been removed from the carton.
- Page 3 57mm regulations and standards. 102mm (2-1/4) 125mm (4-7/8) CAUTION: Use only American Standard supplied cable sets. Using non-AS supplied 114mm cables, or cutting, splicing or modifying any (4-1/2) components will void the warranty. 381mm...
- Page 4 MOUNT ENCLOSURE; Fig. 2 Fig. 2 LAVATORY RIM OR etermine location of ENCLOSURE (1). It must be 1. D MOUNTING SURFACE located with-in the 14" (356mm) by 21" (533mm) shaded area shown in Figure 2 in order for electrical 14" connections from the spout assembly to be made.
- Page 5 Fig. 1d. 6. Replace ENCLOSURE COVER (1). Tighten cover screws firmly. STANDARD BATTERY CAUTION: Use only American Standard supplied LONG LIFE POWER PACK cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any components will void the warranty.
- Page 6 8b. Connect the10' EXTENSION (10b) to the POWER SUPPLY 4" ELECTRICAL BOX OR EQUIVALENT BY CABLE (15). Fig. 2c. OTHERS CAUTION: Use only American Standard supplied cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any BLACK & WHITE components will void the warranty.
- Page 7 6. Repeat Steps above for each additional Unit, for a Max. of 15 Units on one AC POWER SUPPLY. 7. Replace ENCLOSURE COVERS. Tighten cover screws firmly. CAUTION: Use only American Standard supplied cable sets. Using non-AS supplied cables, or cutting, splicing or modifying any components will void the warranty.
- Page 8 MAINTENANCE Fig 1 T I O N D E T E C HAND WASH SENSOR OPERATION; Z O N E Fig. 1 When the Sensor detects a user, the water immediately starts to flow. Water flow will stop 2 seconds after user is out of sensor range.
- Page 9 INSTALL / REPLACE THE BATTERY or Fig. 4 LONG LIFE POWER PACK; Fig. 4 1. Remove COVER from ENCLOSURE (1). STANDARD 2. Disconnect BATTERY HOLDER (3) from 27" BATTERY EXTENSION CABLE (5). 3. Remove old BATTERY from BATTERY HOLDER (3). Install new BATTERY (2) making sure the terminal side is inserted first and shape of the battery follows the shape of the BATTERY HOLDER (3).
- Page 10 GENERAL CLEANING; Fig. 6 1. For general cleaning use a damp, soft cloth to clean the spout and the sensor. Fig.6 2. For cleaning dirt use a soft cloth with diluted dish washing detergent. Wipe the area using a wet cloth and dry using a soft cloth.
- Page 11 Weekdays 8:00 a.m. to 7:00 p.m. EST Product names listed herein are trademar ks of AS Amer ica, Inc. ©2014 To learn more about American Standard Selectronic® Products visit our website at: © Amer ican Standard Inc. 2012 www.americanstandard-us.com or e-mail us at: CRTTEAM@americanstandard.com...
Need help?
Do you have a question about the SELECTRONIC 605X.202 and is the answer not in the manual?
Questions and answers