Electrical Connection
1. Electrical wiring must be done by a qualified professional in accordance
with all applicable codes and standards. Turn off electrical power at
service panel before wiring.
2. Do not extend the cord with an extension cord or splitter that is not
supplied with the hood.
3. Grounding of this product is compulsory. Do NOT remove ground prong of
the plug.
Telescopic Chimney
1. Attach the inner telescopic chimney sleeve on to the top wall bracket. It
can be secured with two screws (included) from both sides.
2. Attach the outer telescopic chimney sleeve onto the top of the unit.
3. Secure the outer telescopic chimney sleeve with two 4 x 8mm screws.
4. Extend the inner telescopic chimney sleeve and secure it to the top
bracket on the wall with two 4 x 8mm screws.
Carefully remove the blue coloured plastic protective film prior to final
installation.
OPERATION
The hood is operated using five push-buttons located at eye-level on the right
hand corner or middle of the hood.
The Power button stops all motor operations.
The Low button will power the motor at low speed.
The Med button will power the motor at moderate speed.
The High button will power the motor at its maximum speed.
Push the Lights button and the two lights will come on. Push it again
and the lights will turn off.
12