Kruger KA300 User Manual page 6

❏ Before any cleaning or service procedure, it is important to check that
the appliance is DISCONNECTED from the electrical service panel.
This will prevent power from being switched on accidentally.
❏ It is risky to modify or attempt to modify the characteristics of this
product.
❏ After removing the appliance from the packaging, make sure that
it is undamaged, and that the electrical lead is in perfect condition.
Otherwise contact your dealer before putting the appliance into
operation.
❏ Use this unit only in the manner it is intended for by the manufacturer.
If you have any questions regarding the usage of this appliance,
please contact the manufacturer or the local agent closest to you.
❏ The Manufacturer declines all responsibility in case of failure to comply
with the accident prevention regulations.
❏ Make sure that air is able to circulate freely around the appliance. Poor
ventilation may result in a shortage of oxygen.
❏ Make sure that the appliance is supplied with the type of gas indicated
on the relative sticker next to the main gas connection pipe.
❏ Use of a gas cooking appliance produces heat and moisture in the
room in which it is installed. Ensure that the room is well ventilated by
keeping the air intakes open and in good working order or by installing
an extractor hood with a discharge pipe.
❏ If the appliance is required to be used intensively for a long period of
time, the effectiveness of the ventilation will have to be increased, for
example by opening a window or increasing the power of any electric
extractor fan.
❏ The stainless steel structural housing may have sharp edges. Be
careful to avoid cuts and abrasions during installation and cleaning.
6