Lighting; Mesh Filter - Kruger KA300 User Manual

LIGHTING

The range hood includes lighting provided by two 4 Volt
2.5W LED light fixtures.
Always switch off the electrical supply before carrying out any
!
operation or maintenance on the appliance.
Wait for the light fixture to cool before touching. LEDs can remain hot
!
for some time after turning off.
1. Remove the mesh filter and locate the locking spring of the light.
2. Push the spring and the light can be removed.
3. Change the light as with an identical 4 Volt, 2.5 Watt LED light.

MESH FILTER

The mesh filter should be cleaned frequently; minimum every two months,
or more for frequent to heavy use.
1. Remove the grease filters individually by pulling on the latch. This will
disengage the filter from the hood. Tilt the filter downward and remove.
2. Wash the filters, taking care not to bend them. Allow them to dry
completely before reinserting.
3. When inserting the filters, make sure that the latch handle is visible from
the outside.
4. Align the rear of the filter tabs with the slots in the crease. Pull out the
latch, push filter into position and release.
5. Make sure the filter is securely engaged after assembly.
13