Table of Contents
Advertisement
OPERATION
This range hood is operated using a push
button switch on the front panel.
LIGHTING
The range hood requires two type JCD, 12V, 20W max, G-4 base, halogen bulbs.
WARNING: Always switch off the electrical supply before carrying out any operation or
maintenance on the appliance.
1.
Remove the halogen bulb cover with a athead screw driver.
2.
Remove the bulb by pulling it out of its socket horizontally. DO NOT ROTATE THE BULB.
3.
Replace the bulb with an identical type JCD, 12V 20W G-4 base halogen bulb.
DO NOT touch replacement bulbs with bare hands.
CAUTION: The surface, the cover of the bulbs, and the bulbs themselves may be hot, please use
extra care when removing them.
KT360
6
(from left to right)
• Power
• Low
• Medium
• High
• Lights
Advertisement
Table of Contents
