General; Foreword; Guarantee; Safety Regulations - Xylem Lowara SEKAMATIK 10 E 15M Series Installation And Operation Instruction Manual

1. General

1.1. Foreword

This product corresponds with the requirements of the Ma-
chine directive 2006/42/EC.
The staff employed on installation, operation, in-
spection and maintenance must be able to prove
that they know about the relevant accident preven-
tion regulations and that they are suitably qualified
for this work. If the staff does not have the relevant
knowledge, they should be provided with suitable in-
struction.
The operating safety of the pumps or units (i.e. pump plus
motor) supplied is only guaranteed if these are used in ac-
cordance with the provisions given in the Confirmation of
Order and/or Point 6 in "Installation"
The operator is responsible for following the instructions
and complying with the safety requirements given in these
Operation Instructions.
Smooth operation of the pump or pump unit can only be
achieved if installation and maintenance are carried out
carefully in accordance with the rules generally applied in
the field of mechanical and electrical engineering.
If not all the information can be found in these Operating
Instructions, please contact us.
The manufacturer takes no responsibility for the pump or
pump unit if the Operating Instructions are not followed.
These Operating Instructions should be kept in a safe place
for future use.
If this pump or pump unit is handed on to any third party, it
is essential that these Operating Instructions and the oper-
ating conditions and working limits given in the Confirma-
tion of Order are also passed on in full.
These Operating Instructions do not take into account all
design details and variants nor all the possible chance oc-
currences and events which might happen during installa-
tion, operation and maintenance.
Alterations or changes to the machine are only permitted by
agreement with the manufacturer. Original spare parts and
accessories authorized by the manufacturer should be
used for greater safety. We bear no responsibility for the
consequences of using other parts.
We retain all copyright in these Operating Instructions; they
are intended only for personal use by the owner of the
pump or the pump unit. The Operating Instructions contain
technical instructions and drawings which may not, as a
whole or in part, be reproduced, distributed or used in any
unauthorized way for competitive purposes or passed on to
others.

1.2. Guarantee

The guarantee is given in accordance with our Conditions
of Delivery and/or the confirmation of order. Repair work
during the guarantee period may only be carried out by us,
or subject to our written approval. Otherwise the guarantee
ceases to apply.
Longer-therm guarantees basically only cover correct han-
dling and use of the specified material. Wear and tear,
parts that are subject to wear such as impellers, mechani-
cal seals or packing, shaft seals, shafts, shaft sleeves,
bearings, split rings and wear rings etc., as well as damage
caused during transport or as a result of improper storage
are not covered by the guarantee. In order for the guaran-
tee to apply, it is essential that the pump or pump unit is
used in accordance with the operating conditions given on
the type plate, confirmation of order in the Data Sheet. This
applies particularly for the endurance of the materials as
well as the smooth running of the pump. If one or more as-
pects of the actual operation conditions are different, we
should be asked to confirm in writing that the pump is suit-
able.

1.3. Safety regulations

These Operating Instructions contain important instructions
which must be followed when the pump is assembled and
commissioned and during operating and maintenance.
For this reason, these Operating Instructions must be read
by the skilled staff responsible and/or by the operator of the
plant before it is installed and commissioned, and they
must be left permanently ready at hand at the place where
the plant is in use. The operator must ensure that the con-
tents of the Operating Instructions are fully understood by
the staff. These Operating Instructions do not refer to the
General Regulations on Accident Prevention or local safety
and/or operating regulations. The operator is responsible
for complying with these (if necessary by calling in addi-
tional installation staff).
The safety instructions contained in these Operating In-
structions have the following special safety markings as
specified in DIN 4844:
Safety reference!
Non-observance can impair the pump and its func-
tion.
General Symbol for Danger!
Persons can be endangered.
Warning of electric voltage!
It is absolutely essential that safety information affixed di-
rectly to the pump or pump unit is followed and maintained
so that it is always easily legible.

1.4. Safety instructions

Dangers of not following safety instructions
Failure to follow the safety instructions can result in the fol-
lowing, for example:
 People being at risk because of electrical, mechani-
cal an chemical factors.
 Important functions of the pump of pump unit failing.
Safety instructions for the operator

Depending on the operating conditions, wear and
tear, corrosion or age will limit the working life of the
pump/pump unit, and its specified characteristics.
The operator must ensure that regular inspection
and maintenance are carried out so that all parts are
replaced in good time which would otherwise en-
danger the safe operation of the system. If abnormal
operation or any damaged are observed, the pump
must cease operation immediately.
 If the breakdown or failure of any system or unit
could lead to people being hurt or property being
damaged, such system or unit must be provided
with alarm devices and/or spare modules, and they
should be tested regularly to ensure that they func-
tion properly.
 If dangerous media (e.g. explosive, toxic, hot) leak
out (e.g. from shaft seals), these must be directed
away so that there is no danger to people or the en-
vironment. The provisions of the law must be ob-
served.
10