Safety Instructions And Safety Measures - Samson 45-9 Mounting And Operating Instructions

Safety instructions and safety measures

1 Safety instructions and safety measures
Intended use
The Type 45-9 Regulator is used for flow control. It is mainly used in district heating supply
networks and industrial plants. The regulator is designed to operate under exactly defined
conditions (e.g. operating pressure, process medium, temperature). Therefore, operators must
ensure that the controller is only used in operating conditions that meet the specifications
used for sizing the controller at the ordering stage. In case operators intend to use the device
in other applications or conditions than specified, contact SAMSON.
SAMSON does not assume any liability for damage resulting from the failure to use the de-
vice for its intended purpose or for damage caused by external forces or any other external
factors.
Î Refer to the technical data and nameplate for limits and fields of application as well as
possible uses.
Reasonably foreseeable misuse
The regulator is not suitable for the following applications:
− Use outside the limits defined during sizing and by the technical data
Furthermore, the following activities do not comply with the intended use:
− Use of non-original spare parts
− Performing service and repair work not described in these instructions
Qualifications of operating personnel
The regulator must be mounted, started up, serviced and repaired by fully trained and quali-
fied personnel only; the accepted industry codes and practices are to be observed. Accord-
ing to these mounting and operating instructions, trained personnel refers to individuals who
are able to judge the work they are assigned to and recognize possible hazards due to their
specialized training, their knowledge and experience as well as their knowledge of the appli-
cable standards.
EB 3128 EN 5