Advertisement
Ordering
Oil burner controls, without plug-in base
Gas burner controls, without plug-in base
8/24
Building Technologies Division
Infrastructure & Cities Sector
(plug-in base not included in delivery, must be ordered as a separate item)
For AC 230 V*
LOK16.140A27*
LOK16.250A27*
LOK16.650A27
*
For burner controls operating on AC 100...110 V, 50...60 Hz, the last 2 digits of the
type reference read «17» in place of «27»
Connection accessories for medium-capacity burner controls see Data Sheet N7230
- Plug-in base AGM16 with Pg11 thread for cable entry glands
- Plug-in base AGM16.1 with M16 thread for cable entry glands
Flame detectors
- Silicon photocell detectors RAR9...
(plug-in base not included in delivery, must be ordered as a separate item)
For AC 230 V*
LGK16.122A27*
LGK16.133A27
LGK16.322A27*
LGK16.333A27*
LGK16.335A27*
LGK16.622A27*
LGK16.635A27*
*
For burner controls operating on AC 100...110 V, 50...60 Hz, the last 2 digits of the
type reference read «17» in place of «27»
Connection accessories for medium-capacity burner controls see Data Sheet N7230
- Plug-in base AGM17 with Pg11 thread for cable entry glands
- Plug-in base AGM17.1 with M16 thread for cable entry glands
Flame detectors
- Flame detectors QRA53.../QRA55...
- Ionization probe
Flame detector current measuring device
- For detector current measurements with QRA53..., QRA55... , recommended up to
series C and E
- Not suited for continuous operation
- Only for measurements of short duration
- The KF8832 negates the self-supervision function
Control sequence and
connection diagram like
LAL2.14
LAL2.25
LAL2.65
Control sequence and
connection diagram like
LFL1.122
LFL1.133
LFL1.322
LFL1.333
LFL1.335
LFL1.622
LFL1.635
Preferred use
Flash-steam generators
Universal application
Heavy-oil burners
see Data Sheet N7713
Preferred use
Flash-steam generators
Flash-steam generators
D (also suited for direct-fired
air heaters), F
D, A
GB
I, F
B, NL
see Data Sheet N7712
to be supplied by thirds
KF8832
CC1N7785en
06.03.2012
Advertisement
