Advertisement
Standards and certificates
Certified with plug-in base and flame detector:
Type reference
LOK16.140...
LOK16.250...
LOK16.650...
LGK16.122...
LGK16.133A17
LGK16.133A27
LGK16.322...
LGK16.333...
LGK16.335...
LGK16.622...
LGK16.635...
Service notes
Life cycle
Disposal notes
Building Technologies Division
Infrastructure & Cities Sector
Conformity to EEC directives
- Electromagnetic compatibility EMC (immunity)
- Low-voltage directive
- Directive for gas appliances
- Directive for pressure devices
ISO 9001: 2010
ISO 14001: 2010
Cert. 00739
Cert. 38233
Identification code to EN 230/EN 298
---
---
---
---
---
---
---
The KF8832 flame detector current measuring device must not be used in
continuous operation
Burner controls has a designed lifetime* of 250,000 burner startup cycles which, under
normal operating conditions in heating mode, correspond to approx. 10 years of usage
(starting from the production date given on the type field). This lifetime is based on the
endurance tests specified in standard EN 230/EN 298 and the table containing the
relevant test documentation as published by the European Association of Component
Manufacturers (Afecor) (www.afecor.org).
The designed lifetime is based on use of the burner controls according to the
manufacturer's Data Sheet. After reaching the designed lifetime in terms of the number
of burner startup cycles, or the respective time of usage, the burner control is to be
replaced by authorized personnel.
* The designed lifetime is not the warranty time specified in the Terms of Delivery
The unit contains electrical and electronic components and must not be disposed of
together with household waste.
Local and currently valid legislation must be observed.
F B/M L L X K
---
---
---
---
---
---
---
---
---
2004/108/EC
2006/95/EC
2009/142/EC
97/23/EC
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
---
5/24
CC1N7785en
06.03.2012
Advertisement
