Table of Contents
Advertisement
Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007 ________________________________
Every column is provided with a power strip with
6xIEC 320 plugs to plug in the illumination unit.
Since power cabling should be done on the right side
of a system (seen from front), the power strip is
mounted also on the right side to the cable hub with
2 nuts.
Attention:
In case of hot standby and countries with a 110 V
power net, at max. 3 projection units can be plugged
into the power strip (current limit!). Therefore for
display walls with rows > 3 in 110 V countries an
additional power strip is included in the delivery.
Mount this power strip also on the cable hub: Use the
fixation facilities on the left side!
DO NOT CASCADE the power strips!!
_______________________________________________
________________________________
________________________________
Installation
Step 62
_______________ 49
_______________
_______________
Advertisement
Table of Contents
