Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007 ________________________________
Take the nut out of the plastic bag containing the
fixation material.
Pull the mirror back, feed in the screw into the long
holes of the adjustment bracket, and use this nut to
fix it to the mirror fixation bracket.
Look at the straight line: this line indicates the zero
position of the mirror.
Zero position: Both, the surfaces of the mirror-side
fixation bracket and the fixation facility on the profile
are exactly at the same level.
_______________________________________________
________________________________
________________________________
Installation
Step 56
_______________ 46
_______________
_______________