Table of Contents
Advertisement
Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007 ________________________________
The design trim is fixed via Velcro tape.
Put the self adhesive Velcro (loop) on the front of the
standard trim.
Arrange the required parts of the design trim, pre-
assemble the trim profiles by means of the brackets.
At the corner, the horizontal trim and the vertical
trim is connected via the corner bracket R823613 and
4 screws B360818
Adjacent horizontal trims or adjacent vertical trims,
respectively,
are
connected
connection R824241 and 6 screws B360818.
Apply the self adhesive Velcro tape (hook) and then
push the design trim firmly onto the standard-trim.
_______________________________________________
________________________________
________________________________
Installation
Step 47
via
the
straight
_______________ 41
_______________
_______________
Advertisement
Table of Contents
