Table of Contents
Advertisement
Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007 ________________________________
After locking the stitch plates, apply the jig for
stitching the screens.
The jig is designed for screens with diagonals of 70"
and 80", thus for 70", it will stick out on one side. So
make sure that one of the adjacent display modules
is still without screen!
Proceed stitching the screens from the mid of a row
towards the left and the right.
Mount the fixation facilities of the jig to the
appropriate "teeth":
Apply the jig and lock it using the bolts and counter
nuts.
_______________________________________________
________________________________
________________________________
Installation
Step 38
Step 39
_______________ 34
_______________
_______________
Advertisement
Table of Contents
