Table of Contents
Advertisement
Barco - OV-708/OV-713/OV-715– R59770137 – installation manual – revision 01– September 2007 ________________________________
The assembly made in the previous step is stable
enough to be placed upright.
Mount the right sidewall (R856330).
DO NOT FASTEN the KANYA connector yet!
Make the front bottom cross connection with the x
profiles, R856331, l=1340.8mm.
DO NOT FASTEN the KANYA connector yet!
Make the front mid cross connection with the x
profiles, R856331, l=1340.8mm.
Now fasten all KANYA connectors!
Mount the additional 90° corner brackets R856527 on
the mid front connection.
Make sure that the open sides of the brackets on the
x-profile show inside!
You have to unscrew the screw mounted to the mid
front connection. Use this screw to fix the corner
bracket to the horizontal profile.
On the vertical profile, slid the corner bracket with its
keyhole into the screw.
Fix all screws.
_______________________________________________
________________________________
________________________________
Installation
Step 05
Step 06
Step 07
_______________ 16
_______________
_______________
Advertisement
Table of Contents
