Mounting on a table
Lift and tilt the Monitor set into its upright
position on a table.
Leave a 10 cm (minimum) space from the wall
for proper ventilation.
Connect the power adapter to the monitor and
then plug the power cord into the wall outlet.
(Power) button on the back of the
monitor to turn it on.
Unplug the power cord prior to moving or
installing the monitor. There is risk of electric
Gather and bind the cables with the supplied cable
Using the Kensington lock
The connector for the Kensington lock is located at
the rear of the monitor.
For more information on installation and usage,
refer to the Kensington lock user manual or visit
the website at http://www.kensington.com.
Connect the monitor to the table with the Kensing-
ton lock cable.
Use of the Kensington lock is optional. The
accessories can be purchased at your local
ASSEMBLING AND PREPARING