Minimum Dimensions For A Craftsman-Built Fire Compartment - Spartherm Ebios-Fire Quadra Inside Automatic I SL Installation And Operating Manual

2.7.1 MINIMUM DIMENSIONS FOR A CRAFTSMAN-
BUILT FIRE COMPARTMENT
• The width of the combustion chamber is dependent upon the length of
burner, and must measure at least 905 mm (Quadra Inside Automatic I
SL) and 1405 mm (Quadra Inside Automatic II SL) respectively.
• The minimum fire compartment height measures 600 mm.
• The depth of the fire compartment is defined as being at least 460 mm.
• The distance from the front edge of the burner compartment to the
housing frame is defined as 150 mm.
• The minimum width of the housing area base measures 300 mm.
• The free cross section for the inlet air opening in the housing
area measures at least 200 cm
• The storage room for the ethanol canisters must be at least the size
defined in 2.4.
min. 905 / 1405 (I SL / II SL)
Fig. 9a Minimum dimensions for combustion chamber
2 / 400 cm 2 .
Fig. 9b Minimum dimensions for combustion chamber with frame
1 External cladding
Mineral wool insulation (in acc. with AGI-Q 132) t ≥ 60 mm
2
Vermiculite or calcium silicate panel t ≥ 40 mm
3
4 Firebox
Inlet air opening 200 cm² / 400 cm² (I SL /II SL)
5
6 Housing area
7 Quadra Inside Automatic burner
8 Viewing panes
GB 12