Advertisement
9
While one person holds fixtures in place check to make sure
fixture is level. DO NOT WALK AWAY LEAVING THE FIXTURES
UNFASTENED BY MECHANICAL MEANS. Fixture can be leveled
via grip lock on opposite end of fixture. Once fixtures are flush
to one another and level install torx head screw through cast
joiners to snug fixtures together. DO NOT OVER TIGHTEN. Torx
screw will pull fixtures together tightly without too much force.
Re-install diffusers to complete installation.
Installation Instructions – Define S122-125 Suspended LED Luminaire
Torx Screw
11
Installation Instructions – Define S122-125 DP/RDP/DIP/RDIP
IL524025EN
www.eaton.com
Screw #1/4-20 Screw into extrusion and through the fixture
tongue to complete mechanical joining of fixtures
10
Advertisement
