Page 1
Revision 01 The typical kit includes three lugs or bus interfaces with hardware for line or load side mounting on the S801T, S801U,S801V, S811T, S811U or S811V frame. There are two screw lengths included with the typical kit. The 2 inch screws are used for line side mounting.
Page 2
Page 2 1. Remove soft starter terminal cover by removing the two #6 cover screws. Once screws have been removed, slide cover off soft starter. Fasten lugs to soft starter with one each long allen head cap screw, 1/4 lock washer, and 1/4 flat washer per pole.