Advertisement
Quick Links
IL524025EN
Installation Instructions –
Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this
product must be performed by a qualified electrician. This product must be installed in accordance
with the applicable installation code by a person familiar with the construction and operation of the
product and hazards involved.
Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or attempting
any maintenance. Disconnect power at fuse or circuit breaker.
Risk of Fire- Minimum 90°C supply conductors.
Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.
Risk of Personal Injury- Due to sharp edges, handle with care.
Failure to comply with these instructions may result in death, serious bodily injury and property
damage.
DISCLAIMER OF LIABILITY: Eaton assumes no liability for damages or losses of any kind that may arise from the
improper, careless, or negligent installation, handling or use of this product.
IMPORTANT: Read carefully before installing fixture. Retain for future reference.
NOTICE: Green ground screw provided in proper location. Do not relocate.
NOTICE: Fixture may become damaged and/or unstable if not installed properly.
Note: Specifications and dimensions subject to change without notice.
ATTENTION Receiving Department: Note actual fixture description of any shortage or noticeable damage on
delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be
filed within 15 days of delivery. All damaged material, complete with original packing must be retained.
Wiring Table
Power Supply (Input)
Maximum Sink/Source current per fixture is 12mA
Define S122-125 DP/RDP/DIP/RDIP
WARNING
Black (BK) - Hot
White (WH) - Neutral
Purple (PU) - 0-10V (+)
Gray (GR) - 0-10V (-)
Neo-Ray
INS #
●
●
When Applicable
Emergency Hot – Black/Red
Emergency Neutral – White/Red
Second Circuit Hot – Black/Orange
Second Circuit Neutral – White/Orange
Second Circuit Dimming Positive – Orange
Second Circuit Dimming Negative – Yellow
Battery/Emergency Unswitched Hot – Blue
Advertisement
Related Manuals for Eaton Neo-Ray Define S122-125 DP
Summary of Contents for Eaton Neo-Ray Define S122-125 DP
- Page 1 Failure to comply with these instructions may result in death, serious bodily injury and property damage. DISCLAIMER OF LIABILITY: Eaton assumes no liability for damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
-
Page 2: Installation
Make sure to level the fixture correctly (applies to submittal for dimensional details). Remove fixture from box and individuals or first piece in row). remove access plate by removing four #8-32 screws. Installation Instructions – Define S122-125 DP/RDP/DIP/RDIP IL524025EN www.eaton.com... - Page 3 Connect power and dimming wires using provided push in Use the Cast Joiners, alignment pins, and fixture tongue to align and guide the fixtures together. connec tors and stuff back into fixture. Installation Instructions – Define S122-125 DP/RDP/DIP/RDIP IL524025EN www.eaton.com...
- Page 4 DO NOT OVER TIGHTEN. Torx screw will pull fixtures together tightly without too much force. Re-install diffusers to complete installation. Installation Instructions – Define S122-125 DP/RDP/DIP/RDIP IL524025EN www.eaton.com...
- Page 5 Product availability, specifications, P: 800-553-3879 and compliances are subject to www.eaton.com/lighting Eaton est une marque de commerce change without notice déposée. Toutes les autres marques © 2019 Eaton de commerce sont la propriété de leur La disponibilité du produit, les All Rights Reserved propriétaire respectif.