4
64
When the menu item
EXIT
is displayed, press and
hold button 1 to exit the cus-
z
tomisation menu.
In order to exit the customisa-
tion menu at any point, press
and hold button 2.
All settings made until then will
be saved.
Anti-lock brake system
(ABS)
Deactivating the ABS
function
Switching on ignition (
SETUP
Press and hold down button 1
until the ABS warning light
changes status.
Initially, the ASC symbol
changes status. Press and hold
down button 1 until the ABS
warning light responds. Under
these circumstances, there is
no change in the ASC setting.
ABS telltale and warning
light shows.
Release button 1 within two
seconds.
ABS telltale and warning
light remains on.
46).
The ABS function is deactiv-
ated, but the integral function
remains active.
Activating the ABS
function
Press and hold down button 1
until the ABS warning light
changes status.
ABS telltale and warning
light goes out; if self-dia-
gnosis has not completed, it
starts flashing.
Release button 1 within two
seconds.