Table of Contents
Advertisement
Press and hold button 1 to
SETUP
start the
menu.
Press button 1 briefly to go to
RDC
the next menu item
In the top display line 2,
is displayed.
The bottom display line 3
shows the preset value.
Press button 4 briefly in order
to change the set value.
The following settings are avail-
able:
ON
: The RDC warning symbol
in the display does not show.
An out-of-tolerance tyre pres-
sure is displayed in the Enduro
and Enduro Pro riding modes.
OFF
: The RDC warning sym-
bol in the display shows and an
out-of-tolerance tyre pressure
is displayed in the Enduro and
Enduro Pro riding modes.
Installing encoding plug
with Pro riding modes
Switching off ignition (
Remove front seat (
.
RDC
OE
ATTENTION
47).
77).
Dirt and damp penetrating
inside open connectors
Malfunctions
Reinstall the protective cap
after removing the coding
plug.
Remove cap of plug 1.
4
71
z
Advertisement
Table of Contents
