Table of Contents
Advertisement
Quick Links
GETTING STARTED GUIDE
IC-317x
Industrial Controller with Reconfigurable I/O
The IC-317x is a high-performance, fanless embedded system designed for rugged industrial
applications. This document explains how to install and configure the IC-317x.
Contents
IC-3171, IC-3172, and IC-3173................................................................................................ 1
Safety Information............................................................................................................ 2
Electromagnetic Compatibility Guidelines....................................................................... 2
Preparing the Environment............................................................................................... 3
Configuring the Hardware................................................................................................ 3
Connecting the System Power Supply.............................................................................. 4
Connecting the Isolated Outputs Power Supply............................................................... 6
IC-3173 (IP67).......................................................................................................................... 7
Safety Information............................................................................................................ 7
Electromagnetic Compatibility Guidelines....................................................................... 8
Preparing the Environment............................................................................................... 9
Configuring the Hardware................................................................................................ 9
Connecting the System Power Supply............................................................................ 10
Connecting the Isolated Outputs Power Supply..............................................................11
Connecting the DisplayPort Connector...........................................................................12
Configuring the IC-317x for NI Linux Real-Time..................................................................13
Connecting to the Development Computer.....................................................................13
Using Vision Builder AI with the IC-317x..................................................................... 13
Installing the NI Industrial Controller Device Drivers................................................... 13
Setting a System Password............................................................................................. 15
Configuring the IC-317x for Windows................................................................................... 15
Connecting the IC-317x to a Network............................................................................ 15
Installing the NI Industrial Controller Device Drivers................................................... 15
Troubleshooting...................................................................................................................... 16
Where to Go Next................................................................................................................... 19
Worldwide Support and Services............................................................................................ 19
IC-3171, IC-3172, and IC-3173
The following information applies to the IC-3171, IC-3172, and IC-3173.
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for National Instruments IC-3171
Summary of Contents for National Instruments IC-3171
-
Page 1: Table Of Contents
Connecting the IC-317x to a Network................15 Installing the NI Industrial Controller Device Drivers........... 15 Troubleshooting........................16 Where to Go Next........................19 Worldwide Support and Services.................... 19 IC-3171, IC-3172, and IC-3173 The following information applies to the IC-3171, IC-3172, and IC-3173. -
Page 2: Safety Information
If the device is damaged, turn it off and do not use it until service-trained personnel can check its safety. If necessary, return the device to National Instruments for repair. Keep away from live circuits. Do not remove equipment covers or shields unless you are trained to do so. -
Page 3: Preparing The Environment
Remove the IC-317x from the package and inspect the system for damage. Notify National Instruments if the system appears damaged in any way. Do not use a damaged system. IC-317x Getting Started Guide | © National Instruments | 3... -
Page 4: Connecting The System Power Supply
Ensure that the AC input into the external power supply is disconnected before plugging in or unplugging any connector. Ground the unit to minimize the possibility of static electricity damage. Figure 1. IC-317x Front Panel POWER PoE1 STATUS PoE2 USER1 USER FPGA1 PoE3 PoE4... - Page 5 Install the power connector into SYS PWR IN on the front panel of the controller and tighten the connector screw flanges to 0.3 N · m to 0.4 N · m (2.7 lb · in. to 3.5 lb · in.) of torque. IC-317x Getting Started Guide | © National Instruments | 5...
-
Page 6: Connecting The Isolated Outputs Power Supply
Turn on the external power source(s). Note Refer to the IC-317x User Manual on ni.com/manuals for a complete description of power inputs and controller startup options. Connecting the Isolated Outputs Power Supply NI recommends the following power supply for the IC-317x. Power Supply Part Number NI PS-15 Industrial Power Supply... -
Page 7: Ic-3173 (Ip67)
If the device is damaged, turn it off and do not use it until service-trained personnel can check its safety. If necessary, return the device to National Instruments for repair. Keep away from live circuits. Do not remove equipment covers or shields unless you are trained to do so. -
Page 8: Electromagnetic Compatibility Guidelines
Clean the device and accessories by brushing off light dust with a soft, nonmetallic brush. Remove other contaminants with a stiff, nonmetallic brush. The unit must be completely dry and free from contaminants before returning it to service. You must insulate signal connections for the maximum voltage for which the device is rated. Do not exceed the maximum ratings for the device on the supply or the reconfigurable I/O (30Vdc). -
Page 9: Preparing The Environment
Remove the IC-3173 (IP67) from the package and inspect the system for damage. Notify National Instruments if the system appears damaged in any way. Do not use a damaged system. Ensure that the AC input into the external power supply is disconnected before plugging in or unplugging any connector. -
Page 10: Connecting The System Power Supply
Figure 5. IC-3173 (IP67) Front Panel PoE 1 PoE 2 SYNC PoE 4 PoE 3 CONNECTOR 0 DIGITAL I/O CONNECTOR 1 POWER STATUS CONNECTOR 2 IC-3173 SYS PWR IN ISO PWR IN 9-30V IP67 Industrial Controller 150W MAX 5-24V RESET 1. -
Page 11: Connecting The Isolated Outputs Power Supply
NI recommends the following power supply for the IC-3173 (IP67). Power Supply Part Number NI PS-15 Industrial Power Supply 781093-01 Note The NI PS-15 is not rated IP67. The following figure shows the isolated power connector. IC-317x Getting Started Guide | © National Instruments | 11... -
Page 12: Connecting The Displayport Connector
Figure 7. Isolated Power Input Connector (IP67) 1. C (Negative) Terminal 3. No connect 2. V (Positive) Terminal 4. No connect Complete the following steps to supply power to the isolated outputs. Verify the power source is turned off. Verify the power source for ISO PWR IN is between 4.5 V to 30 V. -
Page 13: Configuring The Ic-317X For Ni Linux Real-Time
Before using the IC-317x, install the drivers onto the device. Complete the following steps to install and configure NI Industrial Controller Device Drivers: Install NI Industrial Controller Device Drivers onto the Windows development machine connected to the IC-317x. IC-317x Getting Started Guide | © National Instruments | 13... - Page 14 Run NI MAX. Expand the Remote Systems list in the configuration tree. Select the IC-317x in the list. By default, MAX lists devices by the model number followed by the serial number, such as NI IC-317x-XXXXXXXX. Configure the network settings for the IC-317x. Refer to the Remote Systems Help in MAX.
-
Page 15: Setting A System Password
IP address (169.254.x.x). Installing the NI Industrial Controller Device Drivers Before using the IC-317x, install other National Instruments software, such as application development environments, and then install the drivers onto the device. IC-317x Getting Started Guide | © National Instruments | 15... -
Page 16: Troubleshooting
If you have an external USB DVD drive, you can use the external DVD drive to install the NI Industrial Controller Device Drivers from the DVD shipped with the device. Otherwise, complete the following steps to download and install the NI Industrial Controller Device Drivers Connect a USB keyboard and a USB mouse to the USB ports on the IC-317x. - Page 17 IC-317x device main supply, they require power in addition to the IC-317x main supply. LED Error Indications The IC-317x indicates specific error conditions by flashing the STATUS LED a specific number of times. IC-317x Getting Started Guide | © National Instruments | 17...
- Page 18 (IP67 only) This indicates a hardware error. An internal power supply has failed. Check front-panel I/O connections for shorts. Remove any shorts and cycle power to the IC-317x. If the problem persists, contact National Instruments. Solid (RT only) The IC-317x is booting up.
-
Page 19: Where To Go Next
Where to Go Next The following documents and resources contain information you may find helpful as you use the IC-317x in an application. Refer to the National Instruments Product Manuals Library at ni.com/manuals for the most recent versions of product documentation. - Page 20 FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015. © 2016 —2017 National Instruments. All rights reserved. 375283C-01 July 27, 2017...
Need help?
Do you have a question about the IC-3171 and is the answer not in the manual?
Questions and answers