Data Mode - Orientalmotor BXII Series Operating Manual

When using the product with the speed control mode
5.3 Data mode
Up to 16 sets of motor operation data can be set. Once set, the operation data is stored in the driver. The data will not
be lost even after the OPX-2A is disconnected from the driver.
Before setting operation data, read the "BXⅡ Series USER MANUAL" carefully to understand the basic operations,
functions and other details of the driver.
Note • Operation data has significant bearing on motor operation. Before setting any operation data,
make sure you fully understand the content of the operation data.
• If operations are limited by the edit lock function, the operation data cannot be edited.
• Operation data can also be set by selecting the ID in the parameter mode.
• If the value you have input is outside the setting range, "Error" will be displayed for 1 second. If
this error display appears, input a different value that falls within the setting range.
„ Operation in the data mode
„
1. Use the
2. Press the
3. Use the
4. Press the
The display changes to the setting screen of the items in the operation data.
5. Use the
6. When pressing the
operation data number.
Top screen in
the data mode
Note If the
change to any lower level from the top screen, and "mEm-bUSY" is displayed. Be sure to wait until
all internal processing is completed, before pressing the
−18−
key to select the data mode.
key on the top screen in the data mode.
keys to select a desired operation data number.
key.
key to select the operation data item you want to set.
key on the last operation data item, the display returns to the screen of the
Operation
data number 0
Operation
data number 15
*• If operations are limited by the edit lock function, the screens in gray color are not displayed.
key is pressed while the driver performs the internal processing, the screen cannot
Operation
speed
Torque
limiting
Acceleration
time
Deceleration
time
Data clear
key.