Status Indication - Advantech Bivias v2 User Manual

5.7.1 Status indication

About router status inform eight LED indicators on the front panel. ETH port, PORT1 and
PORT2 have two additional LEDs that provide information about port status.
Caption Color State
M1 Green / On
Orange
M2 Orange On
PWR Green Blinking
On
Fast blinking
DAT Red Blinking
WAN Yellow 1x flash per sec.
2x flash per sec.
3x flash per sec.
USR Yellow Function of this LED diode can be selected by user.
OUT Green On
IN Green On
ETH Green On
Off
ETH Yellow On
Blinking
Off
PORT Green Depends on the expansion port (see user's manual for used port).
PORT Yellow Depends on the expansion port (see user's manual for used port).
State indication of WAN LED is updated every 10 seconds.
1
Or the difference between neighbouring cells is exactly 3 dBm.
2
Or the difference between neighbouring cells is smaller than 3 dBm.
Description
Indicates the activity of the first module (green color).
In the case of "HC" version with two HSPA+ SIM cards,
this LED diode indicates the operation of the first SIM
card with green color and operation of the second SIM
card with orange color.
Indicates the activity of the second module.
Router is ready.
Starting of the router.
Updating firmware.
Communication in progress on radio channel.
Signal strength is good.
Signal strength is fair
Signal strength is poor
For value ranges of signal strength see Configuration
manual, chapter Mobile WAN Status.
Binary output active.
Binary input active.
Selected 100 Mbit/s.
Selected 10 Mbit/s.
The network cable is connected.
Data transmission.
The network cable is not connected.
Table 8: Status indication
15
Bivias v2
1
.
2
.