Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Nu-Vu NCO3
Summary of Contents for Nu-Vu NCO3
- Page 1 Models: NCO3 NCO5 Revised: 26March2017...
-
Page 2: Table Of Contents
Model NCO3 & NCO5 Half-Size Electric Convection Oven Unpacking .......................... 1 Maintenance ........................1 Installation .......................... 2 Operating Instructions ......................3 Parts List ..........................4 Electrical Schematic ......................5 Warranty ..........................6... -
Page 3: Unpacking
If so, notify the carrier immediately to file a damage claim. All NU-VU equipment is carefully tested and inspected prior to shipment. When accepted for delivery by carrier, the responsibility for safe arrival at the destination is assumed by the carrier. -
Page 4: Installation
Check to determine that the power source is the same voltage and phase as that indicated on the label on the side of the unit; if the voltage and/or phase is not the same call NU-VU for instructions on changing the voltage and/or phase of your equipment. -
Page 5: Alarm
OPERATING INSTRUCTIONS - 1. Close oven door and push ON/OFF rocker switch to “ON” position. Blower and Elements will not operate if the door is open. 2. Turn thermostat knob to desired temperature setting and allow oven to preheat. The indicator light will go out when the set temperature has been reached. -
Page 6: Table Of Contents
4 ............. 60 Minute Timer (NCO3) ........50-1094-B 4 ............. 60 Minute Timer (NCO5) ......... 66-1116 5..............Timer Knob ............50-1277 6 ..........Blower and Motor Assembly (NCO3) ....... 250-1059 6 ..........Blower and Motor Assembly (NCO5) ....... 250-1066 7 ............Pilot Light (NCO3) .......... 50-0029-A 7 ............ -
Page 7: Electrical Schematic
Electrical Schematic NCO3 & NCO5 Half-Sized Electric Convection Oven PAGE 5... -
Page 8: Warranty
EQUIPMENT WARRANTY NU-VU warrants to the initial purchaser that all NU-VU products shall be free from defects in material or factory workmanship, under ordinary use for the purpose for which it is designed, for a period of one (1) year from the date of shipment from the manufacturing facility. At our option, any equipment will be repaired or a replacement part furnished FOB our factory.
Need help?
Do you have a question about the NCO3 and is the answer not in the manual?
Questions and answers