Storage; Troubleshooting - Hyundai HYBV3000E Manual

8. STORAGE

8.0 Inspect and clean the machine as laid out in the maintenance section.
8.1 Store in a cool dry place away from extreme changes of temperature.
8.2 Ensure the cable is neatly coiled and stored so as not to be a trip hazard or be at risk
of getting damaged.
8.3 Do not stack other items on top of the machine.

9. TROUBLESHOOTING

Problem
Device does not start
Device works with
intermittent fault
Low suction capacity
Low blowing power
Device works with
intermittent power
Possible Cause
Collection bag not fitted
Mains voltage is not
present
Defective on/off switch
Worn carbon brushes
Defective motor
Impeller fan covers still
open
Damaged power cable
Internal loose connection
Defective on/off switch
Collection bag is full
Collection bag is dirty
Selector switch is in wrong
position
Device clogged or blocked
by foreign bodies
Selector switch in incorrect
position
Speed controller in the
wrong position
Foreign bodies blocking
the impeller wheel
15
Solution
Install collection bag
Check plug socket, cable,
line, plug and fuse.
Where appropriate repair
through electrical specialist
Repair via customer
services
Close impeller fan cover
Check cable
Repair via customer
services
Empty collection bag
Clean collection bag
Set selector switch to the
suction symbol
Remove blockages (see
maintenance section)
Set selector switch to the
blowing symbol
Rotate speed controller to
high position
Remove blockage (see
maintenance section)