Advertisement
Installation
14
Finished assembly.
Apply the self-adhesive
15
sticker that displays the
accepted card brands
(supplied) in a clearly
visible location .
MDC style Speed Queen machines will require a
16
few programming steps to ensure proper
operation with a WaveReader.
1.The Serial Jumper on the control board must be removed for
proper operation.
2.For Quantum style machines (operating in Pulse Mode), all cycle
prices must be set to the same value.
3.The Start Value Pulse 'PLSE' must be set to the same coin value as
the WaveReader's. Typically, this value is $.25. The programming
steps for this are detailed in Step 23.
www.heartlandMicroPayments.com
14
Advertisement
