Fluke OptiView III Series Getting Started Manual page 62

OptiView TM Series III
Getting Started Guide
To perform a disk recovery, perform the following:
1.
2. Power-up or restart the analyzer. Keep pressing the F9 key during the
3. You are then asked to Press 'Y' to continue, any other key to cancel and
4. When completed, you are prompted to press <ESC> to reboot the PC.
54
Attach an external USB keyboard.
boot-up sequence. At the point when the black screen with the Fluke
Networks logo is briefly displayed, the F9 key needs to be pressed.
The Fluke Networks OptiView Disk Recovery Utility screen is displayed.
reboot. Press Y to continue with the recovery process. The recovery
process will take about 15 minutes to complete.
Disk recovery is then completed.
You will now have to walk through the Windows license agreement and
OptiView configuration instructions found on the Startup III sheet
supplied with every new purchase.