GasTech BAYKAN Series User Manual page 4

Have your maintenance provided by Baykan Authorized Technical Service staff and
always use
original spares.
The Changes and Modifications that should not be performed on your wall hung
boiler or around its location
After putting your wall hung boiler into operation, never change the water, gas, air
supply switches and electricity circuits.
Do not attempt any modifications or changes on waste gas circuit.
Do not attempt any modifications or changes on central heating circuit system,
safety valve and exit pipe.
The Precautions to Be Taken in the Case of Smelling Gas
Gas inlet valve and the device must be turned off.
Turn the devices which operate using electricity and gas.
Open the windows and doors.
Do not touch the electricity switches.
Do not smoke.
Immediately inform the Authorized Institution (Your Local Gas Distribution Company) and
authorized people (Baykan Main Service Headquarters and Authorized Technical Service).(Gas
Emergency Line:187)
Explosive and Flammable Materials
Do not use explosive and flammable materials close to the location of your device and do not
store them. (example: gasoline, paper paint and similar materials).
Electricity Connection
The supply for your wall hung boiler must be 220V/50Hz and the supply cable must be
connected to the earthed power socket.
The Maintenance of the Wall Hung Boiler
Your device must be serviced at least once a year.
The said service must be provided by Baykan Main Service Headquarters or
Authorized Technical Services.
! 4