ZUMEX Versatile Pro Cleaning Instructions page 2

Cleaning instructions for components
Cleanliness and hygiene warnings.
!
Zumex recommends cleaning the machine at least once or twice a day, depending on how
much it is used in order to maintain optimal food hygiene conditions.
All the parts, except from the cover and the tap can be
put in a dishwasher to clean them. Furthermore, if you
have Silver or Graphite models do not put peel buckets as
well.
Cleaning of the extraction area and any of its removable
parts must be done with a sponge. Do not use scouring
sponges that could scratch the surfaces.
Daily cleaning
Blade, tap, juice container, filter, drip tray, feeder
plate and front cover
1
Clean piece by piece, by hand or in the
dishwasher.
*Check the recommendations regarding parts
that can be washed in the dishwasher (pag. 2)
1Step Extraction Kit
For a quick cleaning, clean the
1Step Extraction Kit assembled
in a single piece under a tap or
in a dishwasher.
Zumex Group S.A. Tel. +34 961 301 251. Fax. +34 961 301 255. zumex@zumex.com. Zumex Service Tel: +34 960 800 999.
2
Clean the feeding plate in the dishwasher or
with a soft sponge to remove the remaining
particles still stuck to it.
1
Clean the entire assembly with a spon-
ge and soap in a single piece under a tap.
Move the pressing units around to make
sure that they are completely clean.
Use a degreaser product for food use to be able to
easily remove all traces of pulp and adhering wax. It is
necessary to sanitize with a disinfectant product after
each cleaning.
Rinse with plenty of water after sanitizing, in order to
remove any remaining disinfectant.
3
Clean the cover with a soft sponge to avoid
damaging the material. Rinse with plenty of
water.
2
The assembly can also be washed in a
single piece in a dishwasher.
www.zumex.com