Philips HQ5811/16 User Manual page 6

ENGLISH
8
C
1
2
C
C
C
C
1
2
3 Turn the wheel anticlockwise and remove
the retaining frame.
4 Remove and clean the shaving heads
(cutters and guards) one by one.
Do not mix up the cutters and the guards.
This is essential since each cutter has been
ground with its corresponding guard for optimal
performance. If you accidentally mix the sets up, it
could take several weeks before optimal shaving
performance is restored.
5 Clean the cutter with the short-bristled
side of the brush.
Brush carefully in the direction of the arrow.
6 Brush the guard.
You can also clean the shaving unit with a
degreasing liquid (e.g. alcohol). If you do, lubricate
the central point of the guards with a drop of
sewing machine oil after cleaning.This prevents
wear of the shaving heads.
7 Reassemble the shaving unit by replacing
the retaining frame. Press the wheel and
turn it clockwise.
8 Put the shaving unit back onto the shaver.