Yamaha ProjectPhone PJP-100H Owner's Manual page 51

2
Start "Command Prompt" in the Windows PC
which can access the Web menu of this unit.
When using Windows XP, select the "Start" menu →
"All Program" → "Accessories" → "Command
Prompt".
3
Enter and run the following command.
tftp -i [IP address of this unit] put [file name of the
firmware]
Example:
tftp -i 192.168.0.6 put pjp_100h_113.bin
The firmware version confirmation window appears.
4
Press .
A confirmation window appears, asking whether you
want to execute the firmware update.
5
Press .
A confirmation window appears, asking whether you
want to execute the firmware update.
The firmware update process takes a few
minutes to complete.
MIC MUTE (red LED) on the top panel of this unit
flashes during the firmware update process. Do not turn
this unit off while MIC MUTE (red LED) is flashing.
To cancel the firmware update
In step 5, press .
■ When the firmware update is complete
This unit restarts automatically.
Check the version number in the "Program Version" on
the top of the Web menu to confirm that the new firmware
has been installed properly.
Updating the Firmware
47