Opening And Closing The Front Plate - Siemens SIMATIC PC BI10 Technical Description

1.4.2

Opening and Closing the Front Plate

In the FI10 and FI15, the system housing (computer box) is attached to the
front plate from behind. The fixing mechanism allows the computer box to
be moved out and tilted down by 90 in the installed state. Please proceed as
follows:
Figure 1-5 Removing the Front Plate of the FI10
SIMATIC PC BI10/FI10/FI15, Technical Description
C79000-G7076-C773-03
In the case of the FI10, remove all the screws that attach the computer
box to the front plate.
In the case of the FI15, the computer box is also screwed to a shield plate.
Only remove the screws that attach the shield plate to the front plate. The
computer box of the FI15 can remain screwed to the shield plate.
System Unit
1-11